Input And Output Signals Of Connectors; Dvs-7200A - Sony DVS-7200A Installation Manual

1-4. Input and Output Signals of Connectors

The input and output signals of the connectors on the rear panel are specified in the following table.
And refer to the following illustration for the pin positions of the connectors.

1-4-1. DVS-7200A

13
[D-SUB 9 PIN • FEMALE]
m
(*1) <CONTROLLER> : Controlling device
(*2) <DEVICE> : Controlled device
PANEL 1 : RS-422A (D-sub 9-pin.Female)
<DEVICE> from Control panel BKDS-7015/7025/7026
(*2)
Pin No. Signal Name
1 GND
2 TX-A
3 RX-B
4 GND
5 FIELD (+)
6 GND
7 TX-B
8 RX-A
9 FIELD (_)
DVS-7200AE IM
[D-SUB 25 PIN • FEMALE]
1
14
25
EXT VIEW
5 1
9 6
EXT VIEW
Function
Frame ground
Transmitted data (_)
Received data (+)
Common ground
Field signal output (+)
Common ground
Transmitted data (+)
Received data (_)
Field signal output (_)
1-4. Input and Output Signals of Connectors
SERIAL
GPI TERMINAL TALLY
REMOTE 4 DME 2
MATRIX DME 4
PANEL 2 EDITOR B
/REMOTE 3 /REMOTE 2
Rear panel
PANEL 2/REMOTE 3 : RS-422A (D-sub 9-pin.Female)
<DEVICE> from Control panel
(*2)
Pin No. Signal Name
1 GND
2 TX-A
3 RX-B
4 GND
5 VD-B
6 GND
7 TX-B
8 RX-A
9 VD-A
(*3) : Control Panel BKDS-2010 etc. (PANEL 2)
Keyer Remote Panel BKDS-7060 etc. (REMOTE 3)
PANEL 1
DME 1
DME 3
EDITOR A
/REMOTE 1
(*3)
Function
Frame ground
Transmitted data (_)
Received data (+)
Common ground
Transmited VD signal (+)
Common ground
Transmitted data (+)
Received data (_)
Transmited VD signal (_)
1-3