Using Password Mode (Password); Menu Displays And Detailed Settings; Menu Structure And Hierarchy - Sony DWR-S03D Operating Instructions Manual

3
Exchanging the encryption key
On the receiver, select REMOTE (wireless remote) as
the method for encryption key exchange.
When the RF REMOTE function is off, REMOTE
cannot be selected.
Note
If the transmitter does not support AES256, select
SECURE KEY.
For details, check the operating instructions included
with the transmitter you want to pair with the receiver.
The receiver searches for a transmitter that it has been
paired with. After the receiver detects the transmitter,
the transmitter exchanges the encryption key with the
receiver and encrypted transmission begins.
Using password mode
Set this mode when multiple transmitters are paired with
multiple receivers for encrypted transmission.
If the transmitters and receivers are set with the same user-
designated password, the audio signal can be decoded.
This mode is useful when multiple transmitters and
receivers are used as a single group, or when the audio
signal from one transmitter is received by multiple
receivers at the same time.
1
With the ENCRYPTION indication on (in the RX1/2
menu), hold down the SET button until the item to be
set flashes.
2
Press the + or – button repeatedly to select
PASSWORD, and then press the SET button.
3
Enter a password of up to 8 characters on the receiver.
+: The first press on the + button displays the character
set. You can then use the + and – buttons to select the
desired character. And then, pressing the SET button
adds the selected character to the end of the current
password.
–: Deletes the last character in the current password.
SET: Enters the character or edited password.
4
Set the encrypted transmission function on the
transmitter to PASSWORD.
5
On the transmitter, set the same password that was set
on the receiver.
For details on transmitter operations, refer to the
operating instructions supplied with the transmitter.
Note
It is recommended that you change the password
periodically.
(PASSWORD)
11
Menu Displays and
Detailed Settings

Menu structure and hierarchy

Menu structure
The receiver has 3 kinds of menu, as follows:
UTILITY menu
A menu that includes meter indications, functions used in
combination with the DWA-01D/F01D wireless adapter
and DWA-SLAU1, and settings for the organic light-
emitting diode display.
RX1/RX2 (tuner 1/2) menu
A menu that includes tuner setting functions.
TX1/TX2 (virtual transmitter 1/2) menu
A menu that allows you to check the settings on the
transmitter currently in communication with the receiver
(tuner 1 or tuner 2).