1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. DWR-R02D
  6. Operating instructions manual

Sony DWR-R02D Operating Instructions Manual

Digital wireless receiver
Hide thumbs Also See for DWR-R02D:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
For the customers in the U.S.A.
SONY LIMITED WARRANTY - Please visit
http://www.sony.com/psa/warranty for important
information and complete terms and conditions of
Sony's limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY - Please visit
http://www.sonybiz.ca/solutions/Support.do for
important information and complete terms and
conditions of Sony's limited warranty applicable to this
product.
For the customers in Europe
Sony Professional Solutions Europe - Standard Warranty
and Exceptions on Standard Warranty.
Please visit http://www.pro.sony.eu/warranty for
important information and complete terms and
conditions.
For the customers in Korea
SONY LIMITED WARRANTY - Please visit
http://bpeng.sony.co.kr/handler/BPAS-Start for
important information and complete terms and
conditions of Sony's limited warranty applicable to this
product.
Pour les clients au Canada
GARANTIE LIMITÉE DE SONY - Rendez-vous sur
http://www.sonybiz.ca/solutions/Support.do pour
obtenir les informations importantes et l'ensemble des
termes et conditions de la garantie limitée de Sony
applicable à ce produit.
Sony Corporation
Printed in Japan
Digital Wireless
Receiver
The supplied CD-ROM includes Operating Instructions for the DWR-R02D Digital
Wireless Receiver (English, French, German, Italian, and Spanish versions) and
the frequency lists (English version) in PDF format.
For more details, see "Using the CD-ROMs" on page 9.

Operating Instructions

Before operating the unit, please read this manual thoroughly
and retain it for future reference.
DWR-R02D
© 2012 Sony Corporation
4-423-975-03 (1)

Advertisement

Table of Contents
loading

Related Manuals for Sony DWR-R02D

Summary of Contents for Sony DWR-R02D

  • Page 1: Operating Instructions

    Sony applicable à ce produit. The supplied CD-ROM includes Operating Instructions for the DWR-R02D Digital Wireless Receiver (English, French, German, Italian, and Spanish versions) and the frequency lists (English version) in PDF format.
  • Page 2 plug to an easily accessible socket-outlet near the unit. If WARNING a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power plug. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or AVERTISSEMENT moisture.
  • Page 3 Operation is subject to the following two conditions: (1) If you have any questions about this product, you may call; this device may not cause harmful interference, and (2) this Sony Customer Information Service Center 1-800-222- device must accept any interference received, including 7669 or http://www.sony.com/ interference that may cause undesired operation.
  • Page 4 MODULE INTÉGRÉ RM-223 Para los clientes de Europa Por medio de la presente Sony Corporation declara que el DWR-R02D cumple con los requisitos esenciales y ID FCC : AK8RM223 IC : 409B-RM223 cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
  • Page 5 Podrobnosti lze získat na následující URL: http://www.compliance.sony.de/ Za stranke v Evropi Klientidele Euroopas Sony Corporation izjavlja, da je ta DWR-R02D v skladu z bistvenimi zahtevami in ostalimi relevantnimi Sony Corporation kinnitab käesolevaga seadme DWR- določili direktive 1999/5/ES. R02D vastavust 1999/5/EÜ direktiivi põhinõuetele ja Za podrobnosti vas naprošamo, če pogledate naURL:...

  • Page 6: Table Of Contents

    TRANSMITTER (Transmitter Virtual) Table of Contents Menu ............ 29 Display of the Transmitter Name Features ............8 (NAME) ..........29 Using the CD-ROMs ........9 Display of the Power Save Setting (POWER Supplied CD-ROM “Wireless Studio” ..9 SAVE) ..........30 Supplied CD-ROM “Digital Wireless Display of the Transmission Power Setting Receiver”...........
  • Page 7 Transmission Power Setting (RF POWER) ........35 Audio Input Level Setting (INPUT LEVEL)..........35 Attenuator Setting (ATT) ......35 Low-cut Filter Setting (LCF)...... 35 +48 V Power Setting (+48V)...... 35 Resetting Accumulated Transmitter Use Time (TIME) ..........35 Internal Signal Setting (INTERNAL SG)... 35 POWER Switch Lock Setting (PWR SW LOCK)..........

  • Page 8: Features

    Digital wireless transmitters can be remotely controlled while checking their status on the display of the DWR- The DWR-R02D Digital Wireless Receiver is a rack- R02D. You can also use the supplied PC control software mountable wireless receiver capable of receiving two to enable remote control from a PC.

  • Page 9: Using The Cd-Roms

    Rack mounting Supplied CD-ROM “Wireless Studio” The DWR-R02D can be mounted in an EIA standard 19- inch rack (1U size). Solid all-in-one structure is adopted on the screw brackets and side panels. The supplied CD-ROM “Wireless Studio” includes the following files.

  • Page 10: Supplied Cd-Rom "Digital Wireless Receiver

    Note software is installed. If you have lost or damaged the CD-ROM, you can purchase a new one from your Sony dealer or Sony service To change the location, click “Change...” and change counter. the location where the software is installed.

  • Page 11: Parts Identification

    Parts Identification Front Panel 1 POWER switch 2 UTILITY button 3 Monitor indicators d VOLUME control 1 Display (see page 12) 5 PHONES terminal 2 Controls (see page 13) a POWER switch Turns the receiver on or off. Set to the \ position to turn the receiver on. Set to the a position when turning off the main power supply.
  • Page 12 1 Display The contents of the display before the DWR-R02D enters menu operation (top display) are described below. Since the top display shows information contained in the metadata sent from the transmitter as well as the receiver settings and status, this can be used for operation monitoring.
  • Page 13 2 Controls H: transmitting at 50 mW M: transmitting at 10 mW The control areas for channel 1 and channel 2 are identical. L: transmitting at 1 mW 1 ALERT indicator For details on changing the transmitter settings, see 2 Jog dial “Changing the Settings on the Transmitter”...

  • Page 14: Rear Panel

    Use the following type of cable when: You can use menu operations to set the output level and to Directly connecting the computer and the DWR-R02D: disconnect the XLR connector grounding (pin 1) and the Cross cable chassis grounding.
  • Page 15 DWR-R02D, the ATTENZIONE RF signal which exceeds the allowable level may be input • Non toccare il connettore LAN direttamente con le mani. to this unit. L’eventuale trasferimento di elettricità statica può To prevent this, set the cable loss and antenna attenuator causare il malfunzionamento dell’unità.

  • Page 16: Preparation

    Attach the supplied four feet to the bottom of this unit, as illustrated below. Attach the adhesive side of the feet to the circular marks at the bottom of the unit. Foot To install the DWR-R02D in the rack, be sure to remove the attached feet. Preparation...

  • Page 17: System Configuration Examples

    BNC connectors into the front panel from the back side, and secure the nuts on the front side. DWR-R02D 1 to 41 1 to 3 1 to 41 Sony digital 1 to 82...
  • Page 18 Use commercially available BNC cables (50 Ω, 60 cm or longer) to connect the antenna mounts with BNC connectors to the ANTENNA a/b IN connectors on the rear panel of the unit. Rear panel attachment Attach the supplied whip antennas to the ANTENNA a/b IN connectors on the rear panel.

  • Page 19: Configuration Example Of Multi-Channel System

    2) Up to 41 DWR-R02D units can be used by incorporating optional WD-850 units. 3) When connecting DWR-R02D units in cascade, set ANT ATT a/b to “0dB” and ANT DC OUT to “OFF” on any DWR-R02D unit that is not directly connected to the antenna.
  • Page 20 Usage Example of Antenna Divider Example of a system that connects a total of 41 units (82 channels) in cascade via a separately sold WD-850 UHF antennas WD-850 (sold separately) System Configuration Examples...
  • Page 21 This system divides the master word clock signal with a divider, and then connects to each device. For digital audio output to be performed correctly, it is Set the 75 Ω termination switches of all DWR-R02D units necessary to connect a device incorporating a sampling to ON.

  • Page 22: Configuration Example Of St Remote System

    Note In the ST remote system, each DWR-R02D unit uses one channel of radio wave. When more transmitters are used in the system, communication congestion may occur, resulting in slow response on the controlled devices. If you plan to use six or more transmitters, operation in NT remote system using the optional RMU-01 is recommended.

  • Page 23: Configuration Example Of Nt Remote System

    Mixer or I/O box To a wall outlet 1) When 41 DWR-R02D units are used, up to 82 transmitters can be used. 2) Up to nine RMU-01 units can be installed to expand the NT remote operation area. 3) Up to 41 DWR-R02D units can be used by incorporating optional WD-850.

  • Page 24: Setting The Receiving Channel

    About operation when using with dedicated digital channel plan For details on groups and channels, refer to “Sony Digital Wireless Microphone System Frequency Lists” on the When performing multi-channel operation with a channel supplied CD-ROM “Digital Wireless Receiver.”...

  • Page 25: Using The Clear Channel Scan Function

    Rotate the jog dial to select CONTINUE, and then transmitter’s channel. press the dial. Note If a Sony digital wireless frequency within the group is not found by the second try, scanning is cancelled. Using the Clear Channel Scan Function This function searches for a channel that is not being used by another wireless device or by a TV station.

  • Page 26: Using The Encrypted Transmission Function

    This receiver is capable of receiving scrambled signals Note from Sony digital wireless transmitters. This function When the RF REMOTE function (see page 30) is off, prevents hacking of the signal. encryption key exchange cannot be carried out.

  • Page 27: Menu Displays And Detailed Settings

    UTILITY menu Menu Displays and BAND Detailed Settings ANT ATT a ANT ATT b ANT DC OUT Menu Structure and Hierarchy AUDIO SYNC SOURCE DELAY ADJUST Menu structure NETWORK RECEIVER NAME IP ADDRESS The receiver has four kinds of menu, as follows: SUBNET MASK RECEIVER menu ALERT FUNCTION...

  • Page 28: Receiver Menu

    For details on items contained in each menu, see RECEIVER Menu “Menu Structure and Hierarchy” on page 27. Rotate the jog dial to change the setting. For details on menu operation, see “Basic Menu Press the jog dial to enter the setting. Operations”...

  • Page 29: Setting Analog Audio Output Level (Bal Out Level)

    Transmitter” on page 35. BALANCED OUT 1/2 connectors. MIC: Selects the microphone level (reference level: –58 The Sony digital wireless transmitter sends not only digital audio signals, but also various other information dBu). LINE: Select the line level (reference level: –12 dBu).

  • Page 30: Display Of The Power Save Setting (Power Save)

    A software update may be necessary to enable proper functioning. For details on software updates, Display of the Low-cut Filter Setting contact your Sony service representative. (LCF) For details on transmitter software versions that are compatible with this receiver, see “Transmitter software The low-cut filter setting of the transmitter is displayed.
  • Page 31 Using the Cross Remote with a previous For details on how to operate the transmitter, refer to pairing the operating instructions supplied with the transmitter. If the wireless remote control condition icon is displayed on the top display of the receiver when the power of the Rotate the jog dial to select YES, and then press the transmitter is ON, use is possible as is.

  • Page 32: Utility Menu

    This item can be set independently for each of the ANTENNA IN connectors. 0dB/5dB/10dB Note When connecting DWR-R02D units in cascade, set ANT ATT a/b to “0dB” on any DWR-R02D unit that is not directly connected to the antenna. DC power supply setting for antennas (ANT DC OUT) Sets the power supply for the antennas connected to the ANTENNA a/b IN connectors.

  • Page 33: Using Password Mode (Password)

    OFF. Note When connecting DWR-R02D units in cascade, set ANT Items Related to Network DC OUT to “OFF” on any DWR-R02D unit that is not (NETWORK submenu) directly connected to the antenna. Items Related to Audio (AUDIO...

  • Page 34: Items Related To Display (Display Submenu)

    Low receiving signal quality ALWAYS ON: The display stays on at the brightness (QL LOW) level set with the BRIGHTNESS function. Specifies whether to display a warning via the ALERT indicator when the quality of the received signal is low. ON/OFF Resetting Parameters to Their Factory Settings...

  • Page 35: Transmission Power Setting (Rf Power)

    “NO DATA” appears for all items in the TRANSMITTER Changing the Settings on menu, except for “SLEEP” in the POWER SAVE indication. the Transmitter Transmission Power Setting (RF POWER) For details on menu operation, see “Basic Menu You can change the transmission power of the transmitter. Operations”...

  • Page 36: Block Diagram

    Block Diagram Divider Digital wireless tuner 1 Digital Signal Processing Digital wireless tuner 2 Terminate 75 ohms Divider Block Diagram...

  • Page 37: When The Alert Indicator Lights

    When the Alert Indicator Lights Indication of Other Indicators Cause of Alert Remedy The AF/PEAK indicator is lit in The audio input of the transmitter has Change the audio input attenuator of the red. exceeded the peak level. transmitter so that the input level does not exceed the peak.

  • Page 38: Error Messages

    Error Messages Message Meaning PLL UNLOCK PLL is unlocked. FAN STOP Cooling fan does not work. PHONES OVER CURRENT Audio output from the PHONES terminal exceeds the maximum allowable current, or the terminal has short-circuited. ANTENNA OVER CURRENT DC outputs from the ANTENNA IN connectors exceed the maximum allowable current, or the connectors have short-circuited.

  • Page 39: Troubleshooting

    Two or more transmitters are set to the same It is not possible to use two or more transmitters that channel. are set to the same channel. Refer to the Sony digital wireless frequency lists included in the supplied CD-ROM “Digital Wireless Receiver” and reset the transmitter channel.
  • Page 40 Symptom Meanings Remedy The power does not A DC power supply is being input. Turn off the external power supply connected to the turn off even when DC IN connector, or disconnect the connected cable. the POWER switch is set to the a position.

  • Page 41: Important Notes On Operation

    Keep the receiver as far from such equipment as possible or use buffering material. The use of portable telephones and other communication devices near the DWR-R02D may result in malfunction On cleaning and interference with audio signals. It is recommended that portable communication devices near the DWR- R02D be turned off.

  • Page 42: Specifications

    Input connector: BNC-R with a 75 Ω Word Sync Specifications termination switch Output connector: BNC-R External Word Sync: 32 kHz to 96 kHz Wireless Remote Control Receiving Section Cross Remote (2.4-GHz IEEE802.15.4 Receiver Type Rackmount (2 channels) compliant) Transmission Method LAN Connector RJ-45 modular jack WiDIF-HP (×2) 100BASE-TX: IEEE802.3u compliant...
  • Page 43 Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR...

  • Page 44: Carrier Frequencies And Channel Steps

    Carrier Frequencies and Channel Steps Underlined items are the factory setting. US models Channel step: 25 kHz Model No. Frequency band Frequency Group/channel (factory setting) TV14-17 470.125 - 493.875 MHz U1424 TV18-21 494.125 - 517.875 MHz 00 1801 494.125 MHz TV22-25 518.125 - 541.875 MHz TV30-33...

Table of Contents