Advertisement
2.
Set a paper roll in the printer so that it
unrolls from the bottom.
3.
Start the roll by pulling some of the paper
out.
4.
Press down on the middle of the cover to
close it. Press firmly until you feel the
cover lock into the closed position.
Do not press on only one side
of the cover to close it.
5.
Hold button A down to print a self-test.
4.1 Cutting the Paper
After you print a subscriber's statement or a printer self-test, cut the paper by pulling it down across
the tear bar from one side to the other.
5 Specifications
Power Adapter
Recommended Thermal Paper
ZyAIR SP-200
Table 3 Specifications
MUT15-050250
FD410
4
Figure 4 Inserting a Paper Roll
Figure 5 Starting a Paper Roll
Advertisement
