3. Mounting Method
3-1. Mounting Precautions
3-1-1. Checking the mounting method
Check that the scale unit can be mounted in the relative position
shown in the Fig. 3-1.
* Do not mount the scale in any other direction since difficulties
with servicing and maintenance may arise.
(Mounting position B is available only when the scale can be
protected from cutting oil and chips. (See "3-1-4"))
A
(Recommended
B
mounting position)
Fig. 3-1 Scale mounting direction
SJ700A
When mounting the scale vertically, be sure to mount the scale
slider on the opposite side of a workpiece or cutting tool.
Cutting tool
Fig. 3-2 Mounting the scale vertically
Slider
Scale
5
(E)