Installation Instructions - KitchenAid KMTM704E Series Technical Education

WARNING
WARNING
Electrical Shock Hazard
Electrical Shock Hazard
Disconnect power before servicing.
Disconnect electrical power at the fuse box or circuit
Replace all parts and panels before operating.
breaker box before installing dishwasher.
Failure to do so can result in death or
Failure to do so can result in death or electrical shock.
electrical shock.

INSTALLATION INSTRUCTIONS

Installation Instructions
Prepare Cabinet Opening—
Existing Utilities
When removing a previous dishwasher, be sure to avoid
damaging the existing power cord, drain line, and water line
connected to the dishwasher.
If the water line and the cable extend to the locations shown,
proceed to the "Install Drain Hose" section. If they do not reach far
enough, follow the instructions in the "Prepare Cabinet Opening—
New Utilities" section.
Prepare Cabinet Opening—New Utilities
Prepare And Route The Electrical Supply
Option A, Power Cord:
NOTE: A grounded 3 prong outlet is required inside a cabinet next
to the dishwasher cabinet opening.
Drill a 1¹⁄₂" (3.8 cm) hole in cabinet side or rear. See the "Product
and Cabinet Opening Dimensions" section.
KitchenAid 2015 Microfiltration Dishwashers
INSTALLATION
n
3-7
7