Honeywell CentraLine EAGLEHAWK NX User Manual page 59

EAGLEHAWK NX CONTROLLER
10. Push the rotate&push button. The following screen displays.
By default, the Date option is set to any week day, any day, any month, any
year as indicated by the three asterisks *** in the Date field. The result of
selections is by "ANDing" all criteria.
Example: For example, if you select weekday of Tuesday, day
of month as 5, and the remaining criteria are "any,"
the event is specified only on Tuesday, the fifth of any
month in any year. If a month does not have Tuesday
the fifth, then there is no event that month
11. Set the options by applying the basic procedures described in the "Adjusting
and Saving Values and Options" section, p. 19.
12. Finish with step 23.
13. Edit the name of the Date Range option as described in the "Editing Text of
New Entry" section, p. 31.
14. Push the rotate&push button. The following screen displays.
The date range option has a start range and end range, each with 3 criteria,
day-of-month, month-of-year, and year.
59
EVERYDAY OPERATIONS
EN2Z-1053GE51 R0119