Table of Contents
Advertisement
Notes on the remote control operating instructions in this text
This instruction manual for this model also covers the systems in the KENWOOD System "SERIES 21" lineup. Since the features
vary depending on the combined systems, the remote control operation illustrations (icons) are shown for two types of remote
control units.
To avoid a confusing and difficult-to-follow explanation of the graphical remote control unit, a simplified explanation is
provided using the operating instructions for a supplied remote control unit. Please reread the operating instructions while
referring to the main differences below.
Operations with the supplied remote control unit are indicated by
Operations with the graphical remote control unit (Sepatrately sold: GRC-151, GRC-102 or GRC-101) are indicated by
.
GRC operation
Example of instruction
text in this manual
Press (select) the *** key.
Press the P.MODE key.
Hints on Using the GRC
All of the procedures for the GRC operations start from the basic
operation screen. Although the explanation for going back to
this screen is omitted on each page, you can easily go to the basic
operation screen if you remember the following procedure.
Main
Menu
Tuner
Return
Confirm
MD
MD
Title Search
MD menu structure
MD
Title Search
MD Edit
Edit
Enter
RC operation
Illustration
Illustration of GRC operation in
this manual
P.MODE
CHARACTER
*1: Icons without shading send you to another menu screen (level) for the next operation. At
the new menu screen, you can select the desired icon.
Set Up
10key
PGM
Basic operation screen.
Mode
Edit
10key
PGM
Mode
Edit
ENTER
Return
ENTER
Return
MD Mode
Set
Random
Rec Input
Repeat
Auto/Manual
Clear
Display
Edit Cancel
Monitor
Set
Enter
.
RC operation
GRC operation (GRC-151 , GRC-102 or GRC-101)
1
Select *** by using joy stick.
ENTER
2
Press the ENTER key.
1
Select "PGM" icon.
2
Press the ENTER key.
*1
PGM
3
Select "P.mode" icon.
ENTER
4
Press the ENTER key.
P.mode
ENTER
÷ When using the GRC, you can return to the previous
menu screen (level) at any time by selecting the
Return
1
Use the joystick to select the MD icon.
2
Press the ENTER key to set the entry.
ENTER
Return
MD PGM
10key Pad (MD)
P.mode
1 2 3
Check
4 5 6
Clear
7 8 9
Repeat
+100
0 +10
Operation of remote control unit
Actual GRC operation
ENTER
ENTER
ENTER
icon, and pressing the
key.
MD
ENTER
ENTER
Return
1 2 3
4 5 6
7 8 9
+100
0 +10
DM-S500 (En)
13
Advertisement
Table of Contents
