Cd Synchro Recording (Deck B Only) - Kenwood X-W320 Instruction Manual

"Synchro recording" can be started from the CD player.
2 2
Preparation
1 Make "Playback (recording) preparation".
2 (Load a disc in the CD player.)

CD synchro recording (Deck B only)

1
Adjust the recording level.
1 Play a CD.
Press the 6 key
of the CD player.
2
Select the track to begin recording with.
3
Start playing the CD.
To pause
To restart recording
To stop
2 Set the record-pause mode.
¶
While pressing the 8 key,
press the ¶ key.
Press the 4 or ¢ key of the CD player,
or
press the numeric key of the desired
track number.
Press the 6 key of the CD player.
Press the 6 key of the CD player.
:
Press the 6 key of the CD player.
:
Press the 7 key of the CD player.
:
!
: Keys and control used in the operations described on this page.
3 Adjust the recording level.
8
"Adjust the recording level."
Synchro recording is not possible when tracks of more than one CD are
programmed using a Carrousel type CD player.
Recording starts at this moment.
When the CD player has completed playback, the cassette deck stops
recording and enters the stop mode.
If the 7 key of the cassette deck is pressed, the cassette deck enters
the stop mode but the CD player does not stop.
Synchro playback/recording
4 Put the CD player in pause
mode.
Press the 6 key
of the CD player.
^
X-W320 (En)