Rewind & Play Operation; Single-Tune Repeated Playback Operation; Dash & Play Operation - Kenwood X-W320 Instruction Manual

Rewind & Play operation
Direction of tape direction indicator: 3.
1
Direction of tape direction indicator: 2.
1

Single-tune repeated playback operation

1 Play the tune to be repeated.
2 Press the play key of the same direction
as the current tape transport direction.
When direction of tape direction indicator
is 3:
Dash & Play operation
The Dash & Play skips long non-recorded spaces automatically as the tape is played.
1
Determine the playback mode (conditions).
2
Press the 1 and ¡ keys simultaneously.
Press simultaneously.
2 7 3
¡
Press simultaneously.
2 7 3
¡
Press simultaneously.
2
7 3
REV.
MODE
1 ¡
Convenient music search (DPSS)
Tape returns to the beginning of the tape side being played and
playback restarts from there.
Press the 7 key to stop playback and cancel this operation.
Normal playback resumes after repeating the same tune for 16 times.
Press the 7 key to stop playback and cancel this operation.
Each press switches the indication.
1 "[" : Two sides are played only once, after which playback
stops.
2 """: Two sides are repeated 8 times, after which playback
stops.
3 """: One side is repeated 8 times, after which playback stops.
In case the REV.MODE key is set to "[" and tapes are inserted in both
of the decks, when a deck finishes Dash & Play, the other deck starts
Dash & Play for 16 times, after which it stops.
Press the 7 key to stop playback and cancel this operation.
X-W320 (En)
1 5