Using The On-Screen Display (Osd) Controls - Lenovo Y44w-10 User Manual

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.
Display overall settings
Brightness
Contrast
Color
Saturation
DCR
Low Blue Light
To use the controls:
1. Press
2. Use or
If there is a sub-menu, you can move between options using
select that function. Use
3. Press
4. Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
80
Brightness
75
Contrast
50
to open the main OSD menu.
to move among the icons. Select an icon and press
or to make adjustments. Press
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
Lenovo Y44w
1920x1080/60Hz/HDMI
70
85
to access that function.
or
to save.
for 10 seconds to unlock the OSD and allow
for 10 seconds to
, then press to
2-4
Chapter 2.