Table of Contents
Advertisement
Monitoring the
Conference
For detailed information on how to operate the
conference system, refer to the manuals supplied with
the SX-M700/M150/M100.
For details of how to operate the SX-H750 Wired
Monitor Unit, see "SX-H750 Wired Monitor Unit" in
"Location and Function of Parts and Controls" on page
6.
1
Insert the earphone into the earphone jack.
2
Set the CH selector to the channel corresponding to
the desired interpreted language.
3
Adjust the sound volume with the VOL control.
Should a problem arise in your system, check the
system while referring to the instructions in the table
below.
For more information on the troubleshooting guide,
refer to the manual supplied with the SX-M700/
M150/M100.
Symptoms
The POWER indicator of
the SXA-J750 lights, even
though the power of the
control panel of the
conference system is not
turned on.
2
The POWER indicator of
the SXA-J750 does not
light, even though the
3
power of the control panel
of the conference system
is turned on.
1
Troubleshooting Guide
Possible cause/remedies
The AC remote switch in the
SXA-J750 is set to CHECK.
n AC remote switch should be
The power cord of the SXA-
J750 is not connected.
n Connect the AC power cord
set to REMOTE. This
operation must be
performed by qualified
service personnel only.
Contact your nearest Sony
dealer.
to the AC IN connector of
the SXA-J750.
If this symptom continues
even after the AC power
cord is connected, contact
your nearest Sony dealer.
11
Advertisement
Table of Contents
