Table of Contents
Advertisement
No.
Parameter Adjustment
3
Blue
B signal adjustment
4
All
Simultaneous RGB adjustment
a) [Red] value is shown.
To return the parameters to their default settings
In the <Primary CCR> group, press [Unity].
Applying the RGB clip effect
1
In the <RGB Clip> group of the Aux >Aux Bus >CCR
menu (2311), press [RGB Clip], turning it on.
2
In the <RGB Clip Adjust> group, select the target item
to set.
Dark: Dark clip adjustment
White: White clip adjustment
3
Set the following parameters.
No.
Parameter Adjustment
1
Red
R signal adjustment
2
Green
G signal adjustment
3
Blue
B signal adjustment
4
All
Simultaneous RGB adjustment
a) [Red] value is shown.
To return the parameters to their default settings
In the <RGB Clip> group, press [Unity].
Status Menu
a)
You can check the state of DME usage in the Status menu.
Displaying DME usage status
Open the Status >DME Status menu (3311).
DME usage status display
a)
The usage status for each DME channel is displayed.
You can check the following status according to the
background color of the display.
Blue: The DME is currently being used in other than the
final program output.
Red: The DME is currently being used in the final
program output.
176
Advertisement
Table of Contents
