Epson LightScene EV-110 User Manual page 109

2. Press the Menu button.
3. Select the Settings menu and press
4. Select Brightness Settings and press
5. Select the Light Source Mode setting and press
Note: You may need to turn off Multi-Projection (Multi-Projection > Off) in order to see the Light
Source Mode setting options.
6. Choose one of the following:
• Normal: Sets the brightness to the maximum level (estimated life span of the light source is
approximately 20,000 hours)
• Quiet: Sets the brightness to 50% and reduces fan noise (estimated life span of the light source is
approximately 20,000 hours)
• Extended: Sets the brightness to 50% and extends the life expectancy of the light source
(estimated life span of the light source is approximately 30,000 hours)
• Custom: Select a custom brightness level between 50% and 100%
7. If you select Custom, select the Brightness Level setting from the Brightness Settings screen and
use the left and right arrow buttons on the remote control to adjust the brightness level.
Enter.
Enter.
Enter.
109