Advertisement
Quick Links
Advertisement
Related Manuals for d&b audiotechnik SL Series
Summary of Contents for d&b audiotechnik SL Series
- Page 1 E7494 Rigging manual 1.3 en...
-
Page 2: General Information
General information E7494 Rigging manual Version: 1.3 en, 10/2020, D2736.EN .01 Copyright © 2020 by d&b audiotechnik GmbH & Co. KG; all rights reserved. Keep this document with the product or in a safe place so that it is available for future reference. We recommend you to regularly check the d&b website for the latest version of this document. -
Page 3: Intended Use
E7494 SL Outriggers E7494 SL Outriggers 1.1 Intended use WARNING! Potential risk of personal injury and/or damage to material! Always secure ground stacked setups against movement and possible tipping over. Observe the maximum number of cabinets permitted. In connection with SL-Series ground stacks consisting of GSL8/ GSL12 or KSL8/KSL12 cabinets, the E7494 SL Outriggers are used to provide an adequate and stable ground support. - Page 4 Preparations and application Preparations and application Attaching and fixing the steel wire ropes To prevent the Socket pins from loosening, prepare the pins as follows: Tools required: Screwdriver Torx #T20 ( ) 1. Attach the key ring of the steel wire [6] to the Socket pins [5]. 2.
- Page 5 Preparations and application Extension length Each outrig pole is provided with hole pairs positioned at specific distances to allow for two different extension lengths of the poles. This provides more flexibility on-site. Footprints* (dimensions) Full size (W x D) Front extension (W x D) Rear extension (W x D) E7490 GSL Touring cart 1.7 x 2 m / 5.6 x 6.6 ft...
- Page 6 Preparations and application Attaching the poles to the cart Note: Graphics shown without loudspeaker cabinets for better illustration. To release and reinsert the Socket pins, you have to access them from underneath the cart. 1. On the cart, release all Socket pins of the corresponding slot. 2.
-
Page 7: Manufacturer's Declaration
Manufacturer's declaration Manufacturer's declaration 3.1 EU conformity (CE symbol) This declaration applies to: d&b E7494 SL Outrigger manufactured by d&b audiotechnik GmbH & Co. KG. All product variants are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications. - Page 8 www.dbaudio.com...