AEG 4625 HC Instruction Manual page 73

05_DVD 4625 HC AEG - GB.indd 73 05_DVD 4625 HC AEG - GB.indd 73
LPCM Output
NOTE:
The „LPCM Output" menu is only available if the „Dialog Output"
option is activated in the „SPDIF/PCM" menu.
Here you can set the sampling rate of the audio signal. Generally speak-
ing, a higher sampling frequency produces a better audio signal.
Channel Delay
If you use a 5.1 audio system, runtime diff erences to the sound can
occur due to the varying distances of the loudspeaker groups from the
listener. Sounds that should be heard by the listener at the same time
arrive successively.
Here you can delay the sound produced by the central and rear loud-
speakers or subwoofer in order to produce a more balanced sound for
the listener.
Select the individual loudspeakers with the Cursor buttons ( / ).
Use the Cursor buttons ( / ) to perform the adjustments.
Equalizer
In these menus you can adjust various sound options to suit your own
personal taste. The optimum setting depends on the consumer and
therefore cannot be stated here.
3D Processing Page
Pro Logic II
The „Pro Logic II" function converts stereo signals such as those on audio
CDs, MP3, VCD or SVCDs into a realistic three-dimensional fi ve-channel
sound experience.
NOTE:
The „Pro Logic II" menu is only available if the "5.1 CH" option is acti-
vated in the "Downmix" menu.
On: Pro Logic II is activated and you can enjoy the fi ve-channel
sound experience.
Off : Pro Logic II is deactivated.
Auto: Pro Logic II is activated automatically if the properties of the
medium to be played back permit Pro Logic II conversion.
NOTE:
The „Mode", „Panorama", „Dimension", „Center Width" menu is only
available if the „On" option or the „Auto" option is activated in the „Pro
Logic II" menu.
English
73
24.06.2010 16:48:57 Uhr 24.06.2010 16:48:57 Uhr