1.2.7 Precautions for Transporting
Note
When transporting the blower, install it to a harness or keep it balanced by holding the shaft tube.
Before transporting the blower on the back of the truck, etc., remove the attachment from the
powerhead, and then secure it so it does not move.
1.2.8 Precautions for Storing
1.3 Safety Devices and Protective Guard
1.3.1 Safety Devices (Stop Devices)
To stop the blower in case of an abnormality, use the stop device on the powerhead and stop the operation
of the blower.
Refer to the powerhead manual for details.
1.3.2 Safety Devices (Quick Release)
In case of an abnormality, the blower can be released from the harness by using the quick release device.
Refer to the powerhead manual for details.
9