4.2 Objects to be Blown
Objects which can be blown are grass, fallen leaves, small stones and sand. Do not blow any other object.
4.3 Pre-operation Check
Before operating the blower, check the following.
(a) Check the installation of the attachment. Secure it if it is loose.
Check to see if there is any looseness, cracks, bending, or distortion of parts (nuts, screws, etc.)
Check to see if the fan tightening nut is tightened.
(For tightening method, refer to "5.1.1 Tightening Method of Nut.")
(b) Manually turn the fan to see if it rotates smoothly.
If it does not rotate, consult your servicing dealer.
(c) Check the idling status. If it is faulty, perform the steps described in the powerhead manual.
Check to see if the blower moves during idling.
If it does, stop the engine and contact the servicing dealer for repair.
(d) In addition to the above, perform the steps described in the powerhead manual.
blower