Advertisement
C
ircuit diagram
Fig. 9
Terminal block
Blue for some countries
Brown for some countries
W
iring diagram
Route Lead wires as illustrated in Fig. 10.
1 4 Field lead wire (black):
Route through the opening 1/opening 2 of
Motor housing, then connect to Brush holder.
Note: Be sure to fix with Lead wire holder 1/
Lead wire holder 6.
2 Field lead wire (white):
Route through the opening 1 of Motor housing,
then connect to Switch.
Note: Be sure to fix with Lead wire holders 2, 3.
3 Lead wire of Noise suppressor (white):
Connect to Switch.
Note: Be sure to fix with Lead wire holders 4, 5.
Fig. 10
Lead wire holder 1
1
groove
8
7
Terminal block
space 2
Strain relief
Field
Power supply cord
[Motor housing viewed from top]
Lead wire holders 2, 3
opening 1
2
6
Power supply cord
Switch
Noise suppressor*
*Noise suppressor is not used
for some countries.
5 Field lead wire (white):
Route through the opening 2 of Motor housing,
then connect to Terminal block.
6 Lead wire (white) of Noise suppressor:
Connect to Terminal block.
7 Lead wire (white or blue) of Power supply cord:
Connect to Terminal block.
8 Lead wire (black or brown) of Power supply cord:
Connect to Switch.
Note: Be sure to route through the groove of Motor housing.
Note: Put slack portions of Lead wires in spaces 1 and 2.
Switch
Brush
holder
Color index of lead wires' sheath
Black
White
space 1
Lead wire holders 4, 5
3
Lead wire holder 6
4
opening 2
5
Noise suppressor (if used)
P 5 /5
Advertisement
