Safety Warning - GE Baker Hughes Masoneilan 4411 Instruction Manual

Safety Information
Important - Please Read Before
Installation
These instructions contain DANGER, WARNING, and
CAUTION labels, where necessary, to alert you to safety
related or other important information. Read the instructions
carefully before installing and maintaining your control valve.
DANGER and WARNING hazards are related to personal
injury. CAUTION hazards involve equipment or property
damage. Operation of damaged equipment can, under certain
operational conditions, result in degraded process system
performance that can lead to injury or death. Total compliance
with all DANGER, WARNING, and CAUTION notices is
required for safe operation.
This is the safety alert symbol. It alerts you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
When used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, could
result in property damage.
Note: Indicates important facts and conditions.
About this Manual
• The information in this manual is subject to change without
prior notice.
• The information contained in this manual, in whole or part,
shall not be transcribed or copied without Masoneilan's
written permission.
• Please report any errors or questions about the information
in this manual to your local supplier.
• These instructions are written specifically for the 4411 IP
Transducer, and do not apply for other instruments or IP
transducers outside of this product line.
© 2019 Baker Hughes, a GE company. All Rights Reserved.
Warranty
Items sold by BHGE are warranted to be free from defects
in materials and workmanship for a period of one year from
the date of shipment provided said items are used according
to BHGE recommended usages. BHGE reserves the right to
discontinue manufacture of any product or change product
materials, design or specifications without notice.
This instruction manual applies to the Masoneilan 4411 IP
Transducer.
Note:
• The 4411 IP Transducer MUST BE installed, put
into service and maintained by qualified and
competent professionals
suitable training.
• Under certain operating conditions, the use of damaged
equipment could cause a degradation of the performance
of the system which may lead to personal injury or death.
• Changes to specifications, structure, and components used
may not lead to the revision of this manual unless such
changes affect the function and performance of the product.
• All surrounding pipe lines must be thoroughly flushed to ensure
all entrained debris has been removed from the system.
IMPORTANT: SAFETY WARNING
Please read these instructions carefully BEFORE this instrument
is installed or maintained.
These converters are intended for use in industrial
compressed air systems only. Ensure that adequate pressure
relief provision is installed if application of system supply
pressure could cause downstream equipment to malfunction.
Installation should be in accordance with local and national
compressed air and instrumentation codes.
Products certified for use in explosion-proof or intrinsically
safe installations MUST:
a) Be installed in accordance with local and national codes
for hazardous area installations, and in accordance with
this manual.
b) Only be used in situations which comply with the
certification conditions stated in this handbook.
c) Only be maintained by qualified personnel with adequate
training on hazardous area implementation.
Before using these products with fluids other than air or for non-
industrial applications consult BHGE.
Masoneilan Model 4411 Electropneumatic Transducer Instruction Manual | 1
who have undergone