Wind Sensor - Honeywell PEHA Compact 952 JRM Operating Instruction

OPERATIOn

WInD SEnSOR

Device menu
Enter
M01
09 Wind sensor
Prog
Setting:  
Selection:
 
Finish: Prog
Factory setting
Blocking: Standard
Note: The "Standard" lock causes the motors to move UP and lock on wind alarm. When the lock is set to "Locking", the affected output remains
activated on wind alarm. This function is used in systems that are locked via external contactors. Wind alarm disables local pushbutton operation
on all motors with assigned wind sensor.
Motor 00-11 Blocking
M01
Enter
Standard
Setting:  
Prog
Blocking
Standard, Blocking
Enter
Standard
GB
GB-15