Sony RDR-GX7 Service Manual page 20

6-7. Path Check Menu (1/2)
1) When the key '1' is pressed down, VIDEOENC path check is
executed.
2) When the key '2' is pressed down, IPCONV path check is
executed. (This item is not installed in the EURO models, NG
is displayed but it is not indicating any default of the main
unit.)
3) When the key '3' is pressed down, TL750 path check is
executed.
4) When the key '4' is pressed down, path check from GTR t
AVENC is executed.
5) When the key '5' is pressed down, path check from GTR t
TL750 is executed.
6) When the key '6' is pressed down, path check from GTR t
FBI is executed.
7) When the key '7' is pressed down, path check from VDEC t
GTR is executed.
8) When the key '8' is pressed down, path check from AVENC
t MSP is executed.
9) When the key '9' is pressed down, path check from AVENC
t GTR is executed.
10) When the key 't' is pressed down, the monitor display moves
to the previous device check menu screen.
6-8. Path Check Menu (2/2)
1) When the key '1' is pressed down, path check from FBItGTR
is executed.
2) When the key '2' is pressed down, path check from AVDEC
t FBI is executed.
3) When the key '3' is pressed down, path check from MSP t
AVDEC is executed.
4) When the key 'T' is pressed down, the monitor display returns
to the previous path check menu screen.
<< PATH TEST MENU 1/2 >>
1) VIDEO ENC
2) IPCONV
3) TL750
4) GTR t AVENC
5) GTR t TL750
6) GTR t FBI
7) VDEC t GTR
8) AVENC t MSP
9) AVENC t GTR
t MENU 2
<< PATH TEST MENU
1) FBI t GTR
2) AVDEC t FBI
3) MSP t AVDEC
T MENU 1
6-4
2/2 >>