Advertisement
STEP 3
Remove grille by pulling away from
the truck on the top and using a pick
or a flat head screw driver, push pins
down on the bottom of the grille and
pull the grille out.
NOTE - BE SURE NOT TO DROP
ANY CLIPS WHEN REMOVING THE
GRILLE
See Figures 3, 3.1
STEP 4
Lay grille flat on the front and set
the RIGID bracket into place as
shown (marked D and P for drivers/
passenger). Using a 1/16" drill bit, drill
each hole through the first layer of
plastic.
BE SURE NOT TO DRILL THROUGH
THE FRONT OF THE GRILLE!
See Figures 4, 4.1
FIGURE 3
FIGURE 3.1
FIGURE 4
FIGURE 4.1
Advertisement
