Cisco ASR 920 Series Manual page 5

Hide thumbs Also See for ASR 920 Series:

Table of Contents

Installing the Cisco ASR 920 Series Router

Step 2

Position one of the brackets against the chassis side, and align the screw holes.

Step 3

Secure the bracket to the chassis with the screws removed when performing Step 1 . The recommended maximum torque

is 10 in.-lb.

Step 4

Repeat Step 2 and Step 3 for the other bracket.

Installing the Router Chassis in the Rack

Note

Ensure adequate air flow when mounting the router in a rack. For more information, see the "Air Flow

Guidelines" section on page 11 .

Note

Install the cable guides before installing the router in a 19-inch EIA rack. See

To install the router chassis in the equipment rack, perform these steps:

Installing the Router Chassis in the Rack

Attaching the Cable

Installing the Cisco ASR 920 Series Router

Guides.

Table of Contents