General Warnings - Digicom Kid-U Instruction Booklet

Kid-U
EN
CONTENTS OF THE PACK
1 Kid-U complete with electronics
1 instruction booklet

GENERAL WARNINGS

- Keep the packaging elements (plastic bags,
cardboard boxes) out of the reach of children,
because they could pose a potential risk to them.
- Use the product only if it is undamaged and
complete in all its parts: if any defects are present,
contact specialised staff or the retailer.
- Do not try to repair the product yourself. Contact
B810 s.r.l. Customer Service.
- In the event of a fault, contact skilled staff or contact
B810 s.r.l. Customer Service.
- Each time you use the product, check that it is
1.working properly, making sure the signal is being
received correctly in the area where you intend to
use it.
- To maintain optimal functioning of the acoustic
alarm, make sure the speaker hole is kept clean and
unobstructed.
- Factors that may have a negative impact on the
performance of the product include: incomplete
battery charge; particular environmental conditions,
thick walls and furnishings, metal structures and
external electromagnetic interference; rooms located
on different floors.
- Make sure the Kid-U is kept away from the main
sources of heat to ensure it does not become too hot.
Do not use rechargeable batteries
- To prevent damage to the device caused by liquid
seeping from the battery, remove the battery every
time it runs down.
- Replace the battery when children are not present
(because they could swallow it), and always use the
type of batteries indicated in this manual; the
operation must always be carried out by an adult.
- To avoid dangerous situations (fires, explosions,
etc.), make sure the batteries are disposed of in
compliance with the regulations in force.
- Kid-U is not designed as a substitute for vigilance
on the part of the parents, because it is not possible
to identify the child's position in real time: there will
be a delay of a few seconds in locating the child,
depending on the various cases in which the device
is used.
- Therefore, do not forget to keep an eye on your
child at all times, especially in crowded places
and/or when the position indicator is red.
- In the app, and using the customisation screen,
users can adapt the device to their own preferences,
by selecting the type of indication (sound/vibration)
they prefer, as well as for the alarms and
notifications.
- The device will revert to the default settings (sound
and vibration ON) every time it is switched back on.
- The product is not suitable for use by children
under the age of three
- In the event of disconnection, the device will emit an
acoustic signal lasting 8 seconds.
- No type of signal (sound or vibration) will be heard
if the smartphone is in silent mode.
- Before using the application, we recommend
disconnecting and reconnecting the Bluetooth mode
of the device in order to ensure it functions perfectly.
1 CONFIGURATION AND CHARACTERISTICS
1.1 Kid-U
1. Coloured bracelet
2. Internal casing
3. Power: 3V dc with CR2032 battery
Description and characteristics
2.1 How to use Kid-U
The device must be worn on the wrist like a watch.
Changing the battery
A visual signal on the App will tell the user when it is
time to replace the battery of the device.
Remove the casing containing the electronics inside
the bracelet (fig.1), gently open it using a small
screwdriver (fig.2) and remove the old battery from
the casing at the back (figs.3 and 4).
Insert the new battery (the same model, CR2032 3V),
in the direction shown in fig.5, and replace the front
casing, making sure that the two small protruding
plastic parts are correctly aligned (fig.6).
Re-insert the casing into the bracelet, making sure
the protruding plastic parts slot into the correspon-
ding shape on the bracelet (fig. 7).
Once you have replaced the battery and opened the
App, re-start the kid-U by shaking it (fig.7) until you
hear an acoustic signal.
When it is switched on again, the Kid-U will
automatically be identified by the App, if it has
already been linked up with it.