Sk1-Ws-Chukei Board - Sony HT-X9000F Service Manual

HT-X9000F/XF9000

2-10. SK1-WS-CHUKEI BOARD

OK
Gap. (Do not touch
the shield main.)
Gap.
– –
CN702
left side
Twist the MAIN board
cable two times.
4 MAIN board cable
connector (CN702)
top side
front side
3 Draw the MAIN board cable
out of two grooves.
3 Draw the MAIN board cable
out of three grooves.
16
NG
No gap. (Touch
the shield main.)
shield
main
groove
screw boss groove
Pass the MAIN board cable
beside the screw boss.
2 packing (CZ2)
hole
boss
boss
shield
main
screw boss
groove
groove
groove
front side
5 screw
(BVTP3 8)
1 MAIN board cable
connector (CN1501)
5 screw
(BVTP3 8)
6 SK1-WS-CHUKEI board
Note: When installing the SK1-WS-CHUKEI
board, align the two bosses and two holes.
hole
bottom cabinet block
right side
packing (CZ2)
screw boss
CN1501
right side
SK1-WS-CHUKEI board