2-6.
SPEAKER CONNECTION CABLE (R-ch)
top cabinet block
left side
Note 1: When pressing the speaker connection
cable into the grooves, set the wire as
shown below.
speaker connection cable
front side
left side
Note 3: When installing the speaker connection cable,
set the position and orientation of the connector
as shown below.
left side
guide line
OK
3 speaker connection cable
[red/black] (for R-ch)
(See Fig. D)
front side
top side
two
grooves
–
–
NG
1 Draw the speaker connection
cable out of two grooves.
soft cloth, etc.
three
grooves
loudspeaker (for R-ch)
Note 2: When connecting the terminals of the speaker
connection cable to the loudspeaker, be careful
of the direction of the terminals.
terminal (narrow)
[black]
front side
terminal (wide)
[red]
OK
NG
speaker connection cable
HT-X9000F/XF9000
2 terminal (narrow)
[black]
2 terminal (wide)
[red]
1 Draw the speaker
connection cable out
of three grooves.
right side
right side
loudspeaker (for R-ch)
OK
NG
13