Basic (Wep) Security; Figure 16 Wizard Step 2: Basic (Wep) Security; Table 11 Wizard Step 2: Basic (Wep) Security - ZyXEL Communications ZyXEL NBG334W User Manual

3.3.1 Basic (WEP) Security

Choose Basic (WEP) to setup WEP Encryption parameters.

Figure 16 Wizard Step 2: Basic (WEP) Security

The following table describes the labels in this screen.

Table 11 Wizard Step 2: Basic (WEP) Security

LABEL
Passphrase
WEP
Encryption
ASCII Select this option in order to enter ASCII characters as the WEP keys.
HEX Select this option to enter hexadecimal characters as the WEP keys.
Key 1 to Key 4
Back
NBG334W User's Guide
DESCRIPTION
Type a Passphrase (up to 32 printable characters) and click Generate. The
NBG334W automatically generates a WEP key.
Select 64-bit WEP or 128-bit WEP to allow data encryption.
The preceding "0x" is entered automatically.
The WEP keys are used to encrypt data. Both the NBG334W and the wireless stations
must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
You must configure at least one key, only one key can be activated at any one time.
The default key is key 1.
Click Back to display the previous screen.
Chapter 3 Connection Wizard
51