LABEL
Secured Client IP
Address
Apply
Reset
17.3 Telnet
You can configure your NBG334W for remote Telnet access as shown next. The administrator
uses Telnet from a computer on a remote network to access the NBG334W.
Figure 93 Telnet Configuration on a TCP/IP Network
17.4 Telnet Screen
To change your NBG334W's Telnet settings, click Management > Remote MGMT > Telnet.
The following screen displays.
Figure 94 Management > Remote MGMT > Telnet
NBG334W User's Guide
DESCRIPTION
A secured client is a "trusted" computer that is allowed to communicate with the
NBG334W using this service.
Select All to allow any computer to access the NBG334W using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NBG334W using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 17 Remote Management
171