6-4.
Equal Electric Potential Terminal
Preparation
1.
Remove the top cover. (Refer to
Procedure
1.
Remove the nut and the toothed washer to detach the equal electric potential terminal.
Nut
(Tightening torque: 6 ± 0.6 N•m)
Toothed washer
OK
Note
When installing, set the equal electric potential terminal to the orientation shown in the figure.
2.
Install the removed parts by reversing the steps of removal.
HVO-500MD/HVO-550MD
"6-2. Top
Cover")
NG
Equal electric potential terminal
6-6