Cleaning; Servicing, Maintenance And Component Replacement; Fault Finding - Buffalo NBCO50 Installation, Operating And Servicing Instructions

Electric convection ovens
Table of Contents

Advertisement

CLEANING

Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent, do not use abrasive
materials. Dry with a soft cloth.
When cleaning the inside of the oven, take care not to damage the thermostat phial
located at the top right hand side of the oven interior.
The oven shelf incorporates a stop and also an anti-tip feature. To remove the oven
shelf, push firmly to the rear of the oven and lift up at the back. The shelf may now
be drawn forward until the stop is reached, and then lifted up and withdrawn from
the oven. Reverse the procedure to refit the shelf.
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
Door inner glass: Using an allen key, remove the magnetic catch plate from the
door inner. The glass may then be removed for cleaning.
Light bulb: Remove the glass cover by hand. Unscrew bulb. To replace the bulb,
reverse the procedure.
Door seals: Take the hook at the ends of the seal out of each hole and use the
holes to clip the new seal into place.
All other servicing, maintenance and component replacement on this appliance
should be carried out by one of our recommended service engineers.

FAULT FINDING

Please refer to the Service Help Desk number on the final page of this manual.
IS 691 ECN 4234
Page 6 of 8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nbco100

Table of Contents