The Ap Lists Edit Screen; Figure 54 The Controller > Ap Lists > Edit Screen; Table 19 The Controller > Ap Lists > Edit Screen - ZyXEL Communications ZyXEL NWA3160 User Manual

Chapter 6 AP Controller Mode (NWA-3160 Only)
Table 18 The Controller > AP Lists Screen
LABEL
Unmanaged Access Points List
Index
Select
IP
MAC Address
Model
Description
Add
Automatic Refresh Interval
Refresh

6.3.2 The AP Lists Edit Screen

Use this screen to change the description or radio profile of an AP managed by the ZyXEL
Device. Click Edit in the CONTROLLER > AP Lists screen. The following screen displays.
Figure 54 The Controller > AP Lists > Edit Screen
The following table describes the labels in this screen.
Table 19 The Controller > AP Lists > Edit Screen
LABEL
Model
MAC Address
Description
WLAN1 Radio Profile
88
DESCRIPTION
This section lists the CAPWAP-enabled access points in the area
that are in managed AP mode, but are not currently controlled by the
ZyXEL Device.
This is the index number of the unmanaged AP.
Choose the unmanaged AP to have managed by the ZyXEL Device
and click Add.
This is the IP address of the unmanaged AP.
This is the MAC (Media Access Control) address of the unmanaged
AP.
This is the model number of the unmanaged AP.
This is the description you enter for the unmanaged AP.
Click this to add an unmanaged AP to the Managed Access Points
list.
Enter how often you want the ZyXEL Device to update this screen.
Click this to update this screen immediately.
DESCRIPTION
This is the model number of the managed AP.
This is the MAC (Media Access Control) address of the managed AP.
Enter a short description of this access point (up to 32 English keyboard
characters).
Select the radio profile you want to use for this AP. Configure radio profiles
in the Profile Edit > Radio screen.
Select Disable if you do not want to use a radio profile. The AP's radio is
not active when you select Disable.
ZyXEL NWA-3160 Series User's Guide