Resetting The Zyxel Device; Methods Of Restoring Factory-Defaults; Figure 10 Replace Certificate Screen - ZyXEL Communications ZyXEL NWA3160 User Manual

6 Click Apply in the Replace Certificate screen to create a certificate using your ZyXEL
Device's MAC address that will be specific to this device.

Figure 10 Replace Certificate Screen

You should now see the Status screen. See
screen.
The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes). Simply
log back into the ZyXEL Device if this happens.

2.2 Resetting the ZyXEL Device

If you forget your password or cannot access the web configurator, you will need to use the
RESET button. This replaces the current configuration file with the factory-default
configuration file. This means that you will lose all the settings you previously configured.
The password will be reset to 1234.

2.2.1 Methods of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in three ways:
Use the RESET button to upload the default configuration file. Hold this button in for about
10 seconds (the lights will begin to blink). Use this method for cases when the password or IP
address of the ZyXEL Device is not known.
Use the web configurator to restore defaults (refer to
Transfer the configuration file to your ZyXEL Device using FTP. See the section on SMT
configuration for more information.
ZyXEL NWA-3160 Series User's Guide
Chapter 2 Introducing the Web Configurator
Chapter 2 on page 41 for details about the Status
Chapter 19 on page 225).
43