Table of Contents
Advertisement
3-2 Set-Up Menu
3-1 Connecting External Equipment
3-2-1 Items That Require Setting for Operations
Item number
002 (DVW-522)
CHARACTER
H-POSITION
002 (DVW-522P)
CHARACTER
H-POSITION
003
a)
(DVW-522)
CHARACTER
V-POSITION
003
a)
(DVW-522P)
CHARACTER
V-POSITION
005
DISPLAY
INFORMATION
SELECT
007
TAPE TIMER
DISPLAY
009
CHARACTER
TYPE
a) As the displayed time code data may be delayed by one frame when inserted in the upper half of the picture due to delay of
its display, you must be careful in case of dubbing an off-line editing tape.
3-2
Chapter 3 Setting Up the VTR
The set-up menu contains the settings changed most often, such as position
and type of the characters superimposed on the output to the monitor.
This section describes the items that require setting for operations.
For details on other items not described in this manual, refer to the Maintenance
Manual Part 1.
The items that require setting for operations are shown in the table below.
The value enclosed in a box is the factory setting.
Items that require setting for operations
Item
Settable range
00
l
[14]
l
24
00
l
[12]
l
22
00
l
[56]
l
6A
00
l
[6A]
l
81
[0]
1
2
3
4
5
[0]
1
[0]
1
2
3
Function
Sets the horizontal screen position of the superimposed
characters. A hexadecimal value of 00 indicates the far left of the
screen, and 24 (decimal 36) the far right. Increasing the value
moves the starting position to the right.
Sets the horizontal screen position of the superimposed
characters. A hexadecimal value of 00 indicates the far left of the
screen, and 22 (decimal 34) the far right. Increasing the value
moves the starting position to the right.
Sets the vertical screen position of the first line of superimposed
characters. A hexadecimal value of 00 indicates the top of the
screen, and 6A (decimal 106) the bottom. Increasing the value
lowers the position of the characters.
Sets the vertical screen position of the first line of superimposed
characters. A hexadecimal value of 00 indicates the top of the
screen, and 81 (decimal 129) the bottom. Increasing the value
lowers the position of the characters.
Determines the kind of information to be displayed as
superimposed characters.
0: Time counter display information and VTR status.
1: Time counter display information and user's bits.
2: Time counter display information and CTL.
3: Time counter display information and time code (LTC or VITC).
4: Time code (LTC or VITC) only.
5: "R" (replay) is displayed during DT playback mode.
Determines whether the CTL counter should display a 12-hour or
24-hour clock.
0: 12-hour clock.
1: 24-hour clock.
Determines the type of superimposed characters.
0: White letters on a black background.
1: Black letters on a white background.
2: White outline letters.
3: Black outline letters.
Advertisement
Table of Contents
