Table of Contents
Advertisement
6. Select the required options
The light corresponding to the depressed button
illuminates.
7. Select the DELAY START
To delay starting of the programme, press the DELAY
START button. The figures corresponding to the
selected delay will be displayed for about 3 seconds,
after which the duration of the selected programme will
appear on the display.
During this period it is possible to load other laundry:
depress START PAUSE button;
●
load the laundry;
●
close the door and depress START PAUSE button
●
again.
8. Start the programme
To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing and the
(D
OOR
The pilot light corresponding to the wash phase which is
running is on.
) pilot light illuminates.
The machine starts operating. If a delayed start has been
selected, the countdown will start.
8. At the end of the programme
The machine stops automatically. The display shows a
blinking zero.
If the RINSE HOLD
door will be locked, the light of the START PAUSE
button and the
(D
light remains lit to indicate that the water must be
drained before opening the door. The display shows a
flashing zero.
To empty out the water you can, after turning the
programme selector dial to X position:
select programme
●
out without spinning
select programme
●
S
). Select the spin speed by means of the relevant
PIN
button and then depress the START PAUSE button.
The water is emptied out and the laundry is spun at
the selected spin speed.
At the end of the cycle, the light of the START/PAUSE
button and the
(D
(E
) light illuminates. The door can be opened.
ND
Turn the programme selector dial to Reset X.
Switch the machine off by pressing the ON/OFF button.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
12
option has been selected, the
) pilot lights go out , the only
OOR
(D
), the water is emptied
RAIN
(S
) or
(D
PIN
ELICATE
) pilot light go out, and the
OOR
Hide quick links:
Advertisement
Table of Contents
