Table of Contents
Advertisement
SELECT THE DESIRED OPTIONS
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
pressing the button Start/Pause. The relevant light
will illuminate.
If an incorrect option is selected, the corresponding
indicator lamp flashes for about 2 seconds. For the
compatibility of the options with the washing
programmes, refer to the chapter 'Washing
programmes'.
SELECT THE SPIN SPEED, RINSE HOLD OR
NO SPIN OPTION
Select the spin speed, Rinse Hold option or No
Spin option by turning the spin speed selector.
•
The position 1300 is equivalent to 800 rpm for
the Synthetic and Wool programmes and 700
rpm for the Delicate wash programme.
Rinse hold
By selecting this option the water of the last rinse is
not emptied out to prevent the fabrics from
creasing. When the programme has finished, the
lights D and E are lit to indicate that the water must
be emptied out (See: 'At the end of the
programme').
No spin
By selecting this option all the spinning phases are
excluded. To be used for extremely delicate
material. The machine will add some additional
rinses to the cotton and synthetic programmes.
For the maximum spin speed allowed by each
programme, refer to the chapter 'Washing
programmes'.
SELECT THE DELAY START
Before you start the programme, if you wish to
delay the start, press the button Delay Start
repeatedly, to select the desired delay. The light
corresponding to the set delay lights up.
Delay
Start
8h
4h
2h
You must select this option after you have set the
programme and before you press button Start/
Pause.
You can cancel or modify the delay time at any
moment, before you press button Start/Pause.
Cancelling the delayed start after having pressed
button Start/Pause:
1. Set the washing machine to PAUSE by
pressing button Start/Pause.
2. Press the button Delay Start once, the light
relevant to the selected delay goes off.
3. Press button Start/Pause again to start the
programme.
The selected delay can be changed
only after selecting the washing
programme again.
The door will be locked throughout the
delay time (door locked light lit).
The Delay Start can not be selected
with Drain or Spin programme.
SELECT THE REQUIRED PROGRAMME BY
MEANS OF THE PROGRAMME SELECTOR
DIAL
Turn the programme selector dial to the required
programme. The selector can be turned either
clockwise or anticlockwise.
The green light of button Start/Pause starts to flash.
The pilot lights corresponding to all phases
composing the selected programme are on.
On position
the programme is reset and the
machine is switched OFF.
At the end of the programme the selector dial must
be turned to position
If you turn the programme selector dial
to another programme when the
machine is working, the lights in the
programme progress display will start
to flash to indicate a wrong selection.
The machine will not perform the new
selected programme.
STARTING THE PROGRAMME
To start the selected programme, press the button
Start/Pause; the corresponding pilot light stops
flashing and remains on.
On programme progress display the pilot lights C
and E illuminate to indicate that the appliance starts
operating and the door is locked.
to switch the machine off.
13
Advertisement
Table of Contents
