Web Menu Operation - Sony RCP-3100 Operating Instructions Manual

Web Menu Operation

1
Enter the IP address of the unit in the web browser of a personal computer to access the unit.
Immediately after accessing the web menu, [Configuration Mode] is set to OFF and the menu is in view mode.
2
Click [ON] in [Configuration Mode].
Configuration mode is activated.
Note
While [Configuration Mode] is set to [ON] in the web menu, a camera/CCU cannot be controlled from the unit and the CONFIG
button on the unit flashes. You can override web menu configuration to operate the unit by pressing and holding the CONFIG
button on the unit while the button is flashing.
3
Select the category of the setting you want to change.
4
Set each item.
5
Click the [Apply] button.
The settings are applied to the unit.
Note
The settings are not saved if you switch the selection in the category selection area or close the web browser without pressing
the [Apply] button.
20