Vibration Dampers (Marine Versions) - ABB DCS800 Series Installation Manual

Vibration Dampers (Marine Versions)

The shipping split must be fastened to the floor and roof/wall in marine versions as
follows:
Mounting with a clamp
Vibration dampers details
① Fasten the shipping split to the floor with M10
or M12 bolts through the holes in the vibration
damper flat bar.
② If there is not enough room behind the
cabinets for installation, use the fastening
method shown in
③ Fasten of the upper vibration dampers. For
the positions of the upper vibration dampers, see
the accompanying dimension drawing of the
shipping split!
④ Fasten the support arms to the upper
vibration dampers and roof/wall. Use a clamp
(not included).
3ADW000352R0101 DCS800-A Installation Manual e a
Mounting with a clamp.
Mechanical Installation
35