Part Name - Toshiba RBC-EXW21E2 Quick Reference

Part Name

All display are shown lighted only for the purposes of description
1
Operation mode display
This indicates the mode of operation which is
currently selected.
2
Air direction
This indicates the air direction which has been
selected.
3
Fixed louvers
This appears when the louvers are fixed.
* It also appears when the remote controller function
has been selected.
4
Filter
This appears when it is time to inspect the filter.
5
Grille up/down
This appears when the grille is goes up or goes
down.
6
Self-cleaning operation
This appears while self-cleaning is underway.
7
Defrosting
This appears while defrosting is underway during a
heating operation.
8
Ready
This display appears on some models.
9
Heating ready (indoor fan stops while this is
displayed)
This appears before a heating operation starts or
while defrosting.
10
No function
This appears when a button is pushed but there is
no corresponding function.
11
FROST PROTECT operation
This appears during a frost protection operation.
12
Numeric display
This displays the numeric value of the temperature,
the numerical order of the trouble history events or
the code numbers when the functions are set.
13
Remote control sensor
This appears when the remote control sensor is
used.
31 1
30
29
28
27
26
25 24 23 22 21 20 19 18 17 16 15 14
(Display section)
2 3 4 5 6 7 8 9 10
14
Indoor temperature
This appears when the intake temperature is
displayed on the numeric display.
15
Set temperature
This appears when the set temperature is
displayed on the numeric display.
16
Central control
This appears when key operation limits are being
enforced by the central controller or other unit or
when key operation limits have been set in the
program for the scheduled operation currently
being executed.
17
Save operation
This appears while a save operation is being set or
executed.
18
Ventilation operation
This appears while the ventilation fan is operating.
19
Numeric display
The numbers of the indoor units or numbers of the
scheduled operation programs are displayed here.
20
Air speed display
This indicates the selected air speed.
21
TEST
This appears while a test run operation is being
performed.
22
SETTING
This appears when the clock time, a program or
the timer is being set.
23
ERROR
This appears when there is an error in the program
setting input.
24
Servicing
This appears during servicing.
25
Inspect
This appears when trouble has occurred.
26
Timer function display
This indicates the function whose operation has
been scheduled when a scheduled operation or
timer operation has been set.
– 19 –
11
12
13