Registration Of Title Name; Assigning Title Names - Kenwood CD-224M Instruction Manual

Registration of Title Name

For discs not corresponding to CD-TEXT, a title name can
be given to the disc (max. 25 characters). Operation is pos-
20
sible also w hen the door panel is open. It is convenient to
register titles w hile discs are being inserted.
Preparation

Assigning Title Names

1
Sw itch to title name input mode.
2
Select the desired disc.
1. For discs corresponding to CD-TEXT, a new title name can not be registered.
Notes Notes
2. As the entered title names and the CD-TEXT title information are memorized, the information may be displayed even w hen a disc has been
removed.
Downloaded from: http://www.usersmanualguide.com/
÷ Load discs into the carousel.
÷ Set the CD player to stop mode.
÷ Check that the unit is in the normal play
TRACK mode.
1 Press the M ODE key.
M ODE
2 Select "TITLE INPUT".
∞ DISC SKIP 5
3 Set the input.
SET
1 Select the disc number.
∞ DISC SKIP 5
Previous disc Next disc
2 Set the input.
SET
0
#
: Keys and controls used in the operations described on this page.
÷ When the M ODE key is pressed during title name input mode, the input
mode is cancelled.
The display flashes.
T I
D -
÷ The disc number can be selected directly by using the numeric keys in
place of the DISC SKIP keys.
÷ During playback, the disc only being played can be selected.
Registration of Title Name
T L E I I N P U T
- - C S E L E C T
CD-2 2 4 M / DPF-J5 0 1 0 (En)
N D M O
N D M O