Kenwood CD-2280M Quick Start Manual

KENWOOD
CD-2280M/CD-2260M CD Changer Quick-Start Guide
In this guide we'll show
you:
* How to use Simultaneous Dual-Room
Play and Continuous Play (CD-2280M)
* How to mute DTS CDs during
Continuous Play (CD-2280M)
* How to enter disc and track names
* How to set up the VR-2090 receiver for
Dual-Room Play with the CD-2280M
Simultaneous Dual-Room Play (CD-2280M only)
The CD-2280M has dual disc transports. Transport A piays through analog output A and the digital output;
transport B plays through analog output B. You can play discs on both transports at the same time for
Simultaneous Dual-Room Play.
To activate either transport,
press the front-panel
OPERATION button.
The A and B indicators above
the button will light accordingly
The player's front-panel trans-
J
port controls will operate the
active transport
(see above)
3. Press CONTINUOUS PLAY
The display reads:
CONTINUOUS PLAY
Note:
* During Continuous Play
the same signal plays from
analog outputs A and B
By alternating between its two
disc transports, the CD-2280M
can play tracks continually with-
out any interruption between
tracks
2. Press PLAY,
or activate one
of the following
playback
modes: * The digital output is not
All Disc used during Continuous
Random Play, Play
Nome Play, * DTS CDs that are muted
sic Type omanscre" acy | ears by the user (see next
Selection Play ing Continuous Play so
that digital noise is not
REMOTE CONTROL UNIT
RC-POS06 sent through the analog
output