Marker Settings Item - JVC Connected Cam GY-HC550U Instructions Manual

9 Top
For setting the maximum luminance level for the
zebra pattern display.
[Setting Values: Over, 100%, 98%, 95% to 5% (in
5% increments)] (R80%)
9 Bottom
For setting the minimum luminance level for the
zebra pattern display.
[Setting Values: 100%, 98%, 95% to 0% (in 5%
increments)] (R70%)
Memo :
The relation between Top and Bottom is such
0
that Top>Bottom always holds. To maintain this
relation during setting, the setting value is
automatically corrected.
Peaking Frequency
For setting the frequency bandwidth for
emphasizing the outline using the [PEAKING]
button.
[Setting Values: High, RMiddle, Low]
Histogram
For setting whether to display the histogram, which
shows the distribution of different points with
different levels of brightness in an image.
[Setting Values: On, ROff]
9 Histogram Top
For selecting the maximum brightness limit for
changing the histogram display color.
[Setting Values: 5% to 110% (in 5% increments)]
(R 80%)
When [Color Space] is set to "J-Log1"
0
[Setting Values: -5F-stop, -4F-stop, -3F-stop(2%),
-2F-stop, -1F-stop, 0F-stop(18%), ⅓F-stop, ⅔F-
stop, 1F-stop, 1⅓F-stop, 1⅔F-stop, 2F-stop, 2 ⅓
F-stop(90%), 2 ⅔ F-stop, R3F-stop, 3 ⅓ F-stop, 3
⅔ F-stop, 4F-stop, 4 ⅓ F-stop, 4 ⅔ F-stop, 5F-
stop, 5 ⅓ F-stop, 5½F-stop]
Memo :
When [Color Space] is set to "J-Log1", a green
0
line appears which corresponds to the "0F-
stop(18%)" portion of the subject with 18%
reflectance.
9 Histogram Bottom
For selecting the minimum brightness limit for
changing the histogram display color.
[Setting Values: 0% to 105% (in 5% increments)]
(R 20%)
When [Color Space] is set to "J-Log1"
0
[Setting Values: -6F-stop, -5F-stop, -4F-stop,
R-3F-stop(2%), -2F-stop, -1F-stop, 0F-stop(18%),
⅓ F-stop, ⅔ F-stop, 1F-stop, 1 ⅓ F-stop, 1 ⅔ F-
stop, 2F-stop, 2 ⅓ F-stop(90%), 2 ⅔ F-stop, 3F-
stop, 3 ⅓ F-stop, 3 ⅔ F-stop, 4F-stop, 4 ⅓ F-stop,
4 ⅔ F-stop, 5F-stop, 5 ⅓ F-stop]
Memo :
When [Color Space] is set to "J-Log1", a green
0
line appears which corresponds to the "0F-
stop(18%)" portion of the subject with 18%
reflectance.

Marker Settings Item

For setting the marker and safety zone, which are
useful in helping you determine the angle of view
for the image according to the shooting purpose.
(A P169 [Marker and Safety Zone Displays
(Camera Mode Only)] )
Memo :
During Clip Review or when in the Media mode,
0
the markers do not appear regardless of the
setting.
Marker
For setting whether to display marker, safety zone,
and center marks on the screen.
[Setting Values: On, ROff]
9 Grid Marker
For setting whether to display a 3x3 grid on the
screen.
[Setting Values: On, ROff]
Memo :
When [Grid Marker] is set to "On", [Aspect
0
Ratio], [Aspect Marker], and [Safety Zone] do
not function.
127
LCD/VF Menu