Makita BO5040 Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Armature
DISASSEMBLING
(2) Remove Flat washer 4, Bearing box and Ball bearing 6202DDW from Fan 88 as illustrated in Fig. 4.
Fig. 4
Fan 88
M4x16
Pan head screw
(3) Skirt set of this product can be adjusted in 8 angles according to the user's convenience. It is required to return the
repaired product to the user, keeping the Skirt set in the same angle as it was. Memorize the set angle of Skirt set
before disassembling.
(4) Remove Skirt set. And then, disassemble Fan 88 and Armature together with Bracket as illustrated in Fig. 5.
Fig. 5
1. Disassemble Skirt set
by unscrewing 4x18
Tapping screws.
4x18 Tapping
screw (2pcs.)
Skirt set
While blocking Fan with Screwdriver inserted
through the hole for Dust bag assembly,
remove M4x16 Pan head screw.
Flat washer 4, Bearing box and Ball bearing
6202DDW can be removed from Fan 88.
Fan 88
4. Remove Armature
from Bracket with
Arbor press.
Fan 88
Ball bearing
6202DDW
2. Remove Fan 88.
Bearing box
Flat washer 4
M4x16
Pan head screw
3. Remove Bracket by unscrewing
four 4x18 Tapping screws.
Armature comes with Bracket.
Armature
4x18 Tapping
screw (4pcs.)
P 3/ 9
Bracket