Honeywell DH45W User Manual page 10

USE & OPERATION (CONTINUED)
CONTROL PANEL (CONTINUED)
Temperature / Timer Display
When the unit is switched ON, the Temperature / Timer Display shows the current room temperature.
Pressing the Timer temporarily switches the display to show the Timer setting (in hours) for
10 seconds, before reverting back to the temperature display.
Humidity Control Setting
When the unit is switched ON, the Humidity Display shows the current humidity percentage. Press
▲ or ▼ to select your preferred humidity level. The humidity is adjusted in increments of 5% by
pressing ▲ or ▼. The adjustable Relative Humidity (RH) range is between 30% RH to 90% RH. Ten
seconds after setting the preferred humidity setting, the display will revert back to displaying the
current humidity.
Recommended Settings: It is recommended to leave the unit running at 30% humidity at High Fan
Speed during the first 2 to 3 days until damp odors are removed. After a few days when the Relative
Humidity has been reduced to a more comfortable level, press ▲ or ▼ to choose a higher RH% that
maintains a comfortable humidity level thereafter. A recommended healthy humidity level is between
40% and 50%.
NOTE: The humidity sensor senses current humidity in the surrounding area. It is normal for a 5°F to
9°F (3°C to 5°C) variance in the humidity sensitivity from the sensor.
°C/ °F Display Options
Press °C/ °F to change the Temperature Display from degrees Celcius °C to degrees Fahrenheit °F.
EN 9