Setup 4: Confirming Settings - Yamaha PJP-MC24 Instruction Manual

Step 
Confirming Settings
After you have completed the product and ProjectPhone settings, confirm that the
participants are registered properly.
1
Click Participants on the Web interface's main window while
logged in as an administrator.
The Participants page appears.
2
Make sure that all of the participants that were configured on
page 35 are listed under Participant Information.
3
Confirm that the Status column lists all participants as being
Registered.
If a participant is listed as "Not registered"
• The PJP-MC24 has not registered the participant. Please review pages 33 to 47 and
confirm that the ProjectPhone is configured properly and that the correct participant
configuration information has been entered into the PJP-MC24.
• Confirm that the participant's ProjectPhone is on.
• Confirm that the participant's ProjectPhone is connected properly to the network.
If "Error" is displayed under the status column
See "Troubleshooting" on page 77.

1
Click
2
Confirm
3
Confirm