Table of Contents
Advertisement
See page 106 for the operation of the advanced setup.
■ SIRIUS Satellite Radio Parental Lock
personal identification number reset
SR PIN
Use this feature to set the code number (personal
identification number) for the SIRIUS Satellite Radio
Parental Lock feature to the initial factory setting. This
feature is useful when you forget or want to change the
current code number.
Choices: RESET, CANCEL
• Select "RESET" to set the code number to the initial
factory setting.
• Select "CANCEL" to set the code number to the initial
factory setting.
Note
Even if you set "SR PIN" to "RESET", this unit does not unlock
the locked channels. The initial factory setting of the Parental
Lock code number is "0000".
■ Bi-amplifier setting BI-AMP
Use this feature to activate or deactivate the bi-amplifier
function (see page 16).
Choices: ON, OFF
• Select "ON" if you want to activate the bi-amplifier
function. "SUR.B L/R SP" is set to "NONE"
automatically, and this unit outputs the front channel
audio signals at the SURROUND BACK/BI-AMP
speaker terminals.
• Select "OFF" if you want to deactivate the bi-amplifier
function.
Note
When "BI-AMP" is set to "ON", you can only select "FRONT B"
or "NONE" in "EXTRA SP ASSIGN" (see page 85).
■ SCENE IR code setting
Use this feature to output the remote control signals at the
REMOTE OUT jack automatically when this unit is in the
SCENE mode.
Choices: ON, OFF
• Select "ON" when the component connected to the
REMOTE OUT jack is the Yamaha component and has
the capability of the SCENE control signals. This unit
automatically sends the remote control signals to the
component.
• Select "OFF" when the component connected to the
REMOTE OUT jack is not the Yamaha component and
does not have the capability of the SCENE control
signals.
Note
If noises are output when you operate the SCENE function, set
"SCENE IR" to "OFF".
■ Parameter initialization INIT
Use this feature to reset the parameters of this unit to the
initial factory settings. You can select the category of
parameters to be initialized.
Choices: DSP PARAM, VIDEO, ALL, CANCEL
• Select "DSP PARAM" to initialize all the parameters
• Select "VIDEO" to initialize the parameters in
• Select "ALL" to initialize all the parameters of this
• Select "CANCEL" to cancel the initialization
Notes
• The advanced setup menu parameters are not initialized.
• Use "INITIALIZE" in the sound field program menu to
initialize the parameters of the desired program (see page 72).
SCENE IR
of the sound field programs (see page 72).
"VIDEO SET" (see page 97) and "OSD SHIFT" in
"DISPLAY SET" (see page 96).
unit.
procedure.
Advanced setup
109
En
Advertisement
Table of Contents
