Installing A Dimm In A Dimm Socket - HP ProLiant DL320 Generation 3 Maintenance And Service Manual

Removal and Replacement Procedures
To install a DIMM:
1. Gently push the DIMM into the socket on the system board (1). When the DIMM is
properly seated, the latches close (2).
Figure 2-23: Installing a DIMM in a DIMM socket
2. Press down firmly on the DIMM while pushing the latches inward until the latches snap
into place.
2-28
CAUTION: Use only HP supplied DIMMs. DIMMs from other sources can adversely affect
data integrity.
HP ProLiant DL320 Generation 3 Server Maintenance and Service Guide