Supplying Power And Connecting Up; Supplying Power; Using The Adaptor; Batteries - Yamaha SU10 Owner's Manual

5

Supplying Power

Your SU10 can run through an AC/DC adaptor or on batteries. If you connect up
both at the same time, the SU10 will run from the adaptor.

Using the adaptor

Please be sure to use a Yamaha PA-3B or PA-1B adaptor only. Use of a different
adaptor type may result in electric shock or device damage.
To connect : First connect the DC end of the adaptor to the power connector on
the SU10, then plug the other end of the cable into an AC power socket.
When you have finished using the SU10 : Switch off the power and then discon-
nect the plug from the wall socket.

Batteries

The SU10 accepts six 1.5V AA batteries (R6P or SUM-3). Yamaha recommends
the use of alkaline batteries.
Inserting Batteries
[1] Check that the POWER switch on the rear panel is OFF.
[2] Turn the unit upside down: you will see the battery cover on the lower right.
Press on the arrow with your thumb and slide in the indicated direction, then
lift off.
[3] Insert all six batteries. Refer to the diagram on the rear panel to make sure you
are inserting in the right direction.
[4] Replace the battery cover, making sure it snaps into place.
Supplying Power
and Connecting Up

Supplying Power and Connecting Up

13