Connecting The Power Cord; Turning On The Power - Yamaha CDR1000 Owner's Manual

Professional audio cd recorder

Hide thumbs Also See for CDR1000:

Table of Contents

Connecting the Power Cord

Warning: Turn off all equipment before making any power connections.

Connect the socket-end of the supplied power cord to the AC IN

socket on the rear panel of the CDR1000, and connect the

plug-end to a suitable AC wall outlet, one that conforms to the

power supply requirements stated on the CDR1000 rear panel.

To prevent loud clicks and thumps in your loudspeakers, turn on your

audio equipment in the following order (reverse this order when turning

off your equipment)—sound sources, CDR1000, mixing console, mon-

itor ampliﬁer.

Press the [POWER] switch to turn on the CDR1000.

After a few seconds, "READING" appears on the display as the CDR1000

determines the type of disc loaded. If no disc is loaded, "NO DISC"

appears.

Press the [POWER] switch again to turn off the CDR1000.

Note: Always unload discs before turning off the CDR1000.

CDR1000—Owner's Manual

AC IN

POWER

ON /

OFF

Table of Contents