Panasonic CF-30 Series Operating Instructions Manual page 10

Description of Parts
Right side
Rear side
J H K
A: Hard Disk Drive
Reference Manual "Hard Disk Drive"
B: SD Memory Card Slot
Reference Manual "SD Memory Card"
C: SD Memory Card Indicator
(Blinking: During access)
Reference Manual "SD Memory Card"
D: IEEE 1394 Interface Connector
Reference Manual "IEEE 1394 Devices"
E: Smart Card Slot
<Only for model with Smart Card Slot>
Reference Manual "Smart Card"
F: Modem Port
Reference Manual "Modem"
G: LAN Port
Reference Manual "LAN"
H: USB Port
Reference Manual "USB Devices"
I: DC-IN Jack
J: Security Lock
A Kensington cable can be connected.
For further information, read the manual that comes
with the cable.
K: External Antenna Connector
L: Expansion Bus Connector
Reference Manual "Port Replicator / Car
Mounter"
10
A
L M N O P
B C D E F G H
1394
Bottom
Q
M: External Display Port
Reference Manual "External Display"
N: Headphone Jack
You can connect headphones or amplifi ed speakers.
When they are connected, audio from the internal
speakers is not heard.
O: Microphone Jack
A condenser microphone can be used. If other types
of microphones are used, audio input may not be pos-
sible, or malfunctions may occur as a result.
When recording in stereo using a stereo microphone:
Click (Start) - [Control Panel] - [Hardware and
Sound] - [Sound] - [Recording] - [Microphone] -
[Properties], and then add a check mark for [No Au-
dio enhancements] in [Microphone Enhancements].
When using a monaural microphone with a 2-termi-
nal plug:
Click (Start) - [Control Panel] - [Hardware and
Sound] - [Sound] - [Recording] - [Microphone] -
[Properties], and then add a check mark for [Voice
enhancements] in [Microphone Enhancements].
Otherwise, only audio on the left track will be recorded.
P: Serial Port
Q: RAM Module Slot
Reference Manual "RAM Module"
R: Speaker
Reference Manual "Key Combinations"
I
R